Getting started:
Remove the packaging from the blinds, being careful not to damage the material. Once they are unpacked, check that all parts are included:
- The number of blinds ordered
- Adhesive backing on the top of each blind
- 2 clips
Tools required:
- Tape measure
- Pair of scissors
Download guide
Illustrated steps
Step 1
Measure the width and height of the inside of your window frame. Transfer the measurements onto the temporary paper blind, excluding the fold with the adhesive backing. If the blinds already fit your window, you can go directly to Step 3.
Step 2
Once you’ve transferred the measurements (width and height) onto the blinds, trim them to size using sharp, clean scissors. Before cutting, double-check that the fold with the adhesive backing is not part of the excess material you’re removing.
Step 3
Peel off the protective film from the adhesive backing.
Tip: Wipe the surface of the window frame clean before installing blind.
Step 4
Press the temporary paper blinds onto the top of the window frame to secure them in place. Adjust the opening of your temporary blinds using the two clips.
Step 5
Tip: After installation, use the included clips to hold the blind open.