Aluminium 25mm Venetian Blind

69.00 From 69.00 NZD
In stock

Aluminium Venetians have stood the test of time for good reason! They are stylish, practical and our most cost effective Venetian Blind. You can use Aluminium Venetians in every room of the house from a humid bathroom to a bright sunroom as they won’t rust or fade while also benefitting from both day and night-time privacy due to its simple tilt mechanism.

Installation brackets, screws and instructions come with each blind as well as a three-year guarantee, giving you peace of mind with your Bargain Blinds purchase.


How to order

  1. Due to screen colour variance, we recommend you order a fabric sample first
  2. Measure your window & choose your fit. View Measuring Guide
  3. Enter the measurement details for your blinds and choose from our range of materials, colours and custom details.
  4. You will then be guided through the checkout process. If you have any questions get in touch with us via our contact page.
Measurement (mm)

Measure the width

Measure the width side-to-side of the exact window frame opening in three places (top, middle, bottom). Please provide the smallest of these three measurements and round down to nearest 1/8 inch.

Please note that for an inside mount blind, Blinds to Go recommends a standard deduction of 3/8” (0.375”) on the dimension of the window. This standard deduction permits the blind and the brackets to be installed in the window.

 

Obstructions may cause measurements to vary. Make sure to note them when measuring.

Important: Measure the depth of any protruding sill, ledge or molding that may interfere with the hanging of your blind. Protruding heaters, frames, locks, handles, sills etc. may interfere with your measurements. Please indicate them when measuring your window frame.

Remember: To ensure accurate measurements, use only a high quality, steel tape measure with a wide blade (minimum 1/2”). Tell your Sales Associate about any obstructions inside your window frame (locks, screens, doorknobs, handles, radiators, plants, etc.). Provide all measurements to the nearest 1/8”.

Required minimum depth: Min depth needed: 1 1/2", Full recess depth: 3 1/4”

Measure the height

For inside mount: Measure the HEIGHT (top-to-bottom) of the exact window frame opening in three places (left, center, right). Please provide the LARGEST of these three measurements.

For outside mount: Measure from frame to frame. we recommend to add 2" to the height for wall installation.

 

 

Obstructions may cause measurements to vary. Make sure to note them when measuring.

Important: Measure the depth of any protruding sill, ledge or molding that may interfere with the hanging of your blind. Protruding heaters, frames, locks, handles, sills etc. may interfere with your measurements. Please indicate them when measuring your window frame.

Remember: To ensure accurate measurements, use only a high quality, steel tape measure with a wide blade (minimum 1/2”). Tell your Sales Associate about any obstructions inside your window frame (locks, screens, doorknobs, handles, radiators, plants, etc.). Provide all measurements to the nearest 1/8”.

Required minimum depth: min depth needed is 1 1/2" and for full recess you need 3 1/4”

Min: 400mm Max: 2000mm

* Required Fields

    Be the first to review this product